May 9,2013 4:00 to 6:00 PM

this day i did two jobs with my mentor we changed the radiator of a car and an alignment on a car. for the radiator we just had to disconnect all the hoses and snap ring. then put it all back in.. the snap rings were hard to take off cause they were tiny and hard to grab on to. and we changed the tires on a car. we had to replace the tires on the wheels and had to balance them. balancing the tires is putting weights in the tire so that the steering wheel doesn't shake. the jobs we're not hard but it did take time to do. and i did learn stuff that i didn't know about tires and radiators. it was a good time with my mentor.

May 8, 2013 4:00 to 6:00 PM

these days we did brake service on a 2000 Honda Accord. a brake service  We took off the caliper that pushes the brake pads together to stop the car. We took off the rotors on the axle and put this lubricant like thing on the hardware. we put the rotors on a brake lathe to prevent the brakes from pulsation. and we did a lot more things to the brake parts. it was the biggest job that we had so far. i thought it must be a pain to do that to cars. because it was a lot of work to do that on a tiny car. imagine that job on like a truck.

May 7,2013 7:30 to 9:00 PM

i decided to read the book again and looked at cooling systems and how to test them. i read on how to use the cooling system pressure tester. Also i learned what to look for in when testing the cooling system. mainly the hoses and the caps. i thought it was an okay hour spent because when i finished reading it i thought to my self that i am probably never going to test it my self but again you never know when a skill like that might come in handy. 

May 2, 2013 7:00 to 8:00 PM

today i decided to look at some spark plug info in the book that my mentor gave me. I looked at spark plugs and spark plug wires. i learned how to test the wires and how to adjust the ground electrode of a spark plug. i also looked up distributors even though cars don't use them any more. i learned a decent amount of stuff today like how to use feeler gauges. i thought it was a hour well spent on my own. 

April 27,2013 10:00 AM to 2:00 PM

We checked the fuse box of some GMC pick up truck. the trucks emergency lights would not turn off. So we open the fuse box and checked the fuse for the lights and checked for any damage to it but there was not. so we checked the steering column and we found out that the wire was bad. This day was interesting because we had to really figure out the problem of the truck.

April 12,2013 4:30 PM to 6:00 PM

me and my mentor did a tire rotation. Funny thing about this was before we did this i used to think that a tire rotation was when you just lift the car and turn the tires to see if the wheels were okay. Well i was wrong it is actually when you change tires with a different tire on the car. Well what i actually learned also is there is way in putting the tires back on. You must put the bolts back on in a X form. this visit with my mentor was really informative because i learned what a tire rotation was. 

April 7,2013 9:00 AM to 11:00AM

i got to change the oil of 3 cars. Its not the funnest job to do, but its something. The only hard thing in this job is getting to the oil filter. sometimes its in an awkward position. I started getting more hands on with the cars with my mentor. I think that is a big accomplishment because he trusts me in working on something.